Chi tiết sản phẩm

Đo điện trở tiếp xúc, mối hàn, dây nối đất, dây cáp điện, động cơ, máy biến áp…
Giải đo/ Độ phân giải
0...999,9μΩ /0,1μΩ (Dòng điện thử 10 A)
1,0000...1,9999 mΩ /0,0001 mΩ (Dòng điện thử 10 A)
2,000...19,999 mΩ /0,001 mΩ (Dòng điện thử 10 A)
20,00...199,99 mΩ /0,01 mΩ (Dòng điện thử 1 A)
200,0...999,9 mΩ /0,1 mΩ (Dòng điện thử 0,1 A)
1,0000...1,9999 Ω /0,0001 Ω (Dòng điện thử 0,1 A)
2,000...19,999 Ω /0,001 Ω (Dòng điện thử 10 mA)
20,00...199,99 Ω /0,01 Ω (Dòng điện thử 0,1 mA)
200,0...1999,9 Ω /0,1 Ω (Dòng điện thử 0,1 mA)
Cấp chính xác: ±(0,25% m.v. + 2 digits)
Cung cấp kèm theo:
- Dây đo 3m (2 pcs.) WAPRZ003DZBB
- Đầu kẹp cá sấu K03; black (4 pcs.) WAKROBL30K03
- Đầu kẹp K06 (2 psc.) WAKROKELK06
- Vali đựng máy L1 WAFUTL1
- Dây sạc nguồn WAPRZLAD230
- Pin Ni-MH 4,8V 3Ah WAAKU03
- Cáp RS-232 WAPRZRS232
- Đầu đo (2 pcs.) WASONKEL2OGB
- Dây đeo WAPOZSZE1
- HDSD
- Chứng chỉ hiệu chuẩn của hãng (MMR-630) LSWPLMMR630
Phụ Kiện mua thêm: Kelvin vice with cables
Mã: WAZACKEL1
Bảo hành 12 tháng
Chi tiết
Compare model: SKB MIKO-7, SKB MIKO-8, Metrel MI 3250, Sonel MMR 630, Vanguard WRM-10
Data Sheets
User Manuals
Declarations of conformity

Measurement of resistive object type:
- welded and soldered connections, equipotential bonding, earth wire,
- terminals and connectors, rail welded joints, cables and wires,
- measurement 4-pole method.
Measurement of inductive object type:
- coils (motors and transformers), low resistance coils.
Range selection autoranging or manual (measurement of inductive object type).
Selectable measurement mode adjusted to object type:
- for resistive objects - fast mode (3 seconds),
- for inductive objects - long mode with automatic discharge after measurements (or with lower accuracy - shorter mode).
Selectable measurement mode adjusted to application:
- normal mode - after pushing „START” button,
- automatic mode - since test leads are connected to the object meters automatically starts measurement with dual direction current flow and gives average result - what eliminates eventual DC voltage on tested object,
- continuous mode - every 3 seconds for resistive objects or continuous measurement for inductive objects.
Window mode:
- this option enables setting an upper and a lower limit between which the average measurement result is bound to appear. The results outside of this range will be indicated by two long audible signals and the symbols.
MMR-630 is designated not to be effected by interference up to 20 mV and to show noises from 20 to 100 mV (so in edge conditions even 5 times higher than measured drop of potential).
Memory store for up to 990 results and a communications facility for transferring data from the device to a PC.
Electric security:
- type of insulation: double, according to EN 61010 - 1 and IEC 61557
- measurement category: CAT III 300 V acc. to EN 61010 - 1
- protection class acc. to EN 60529: IP54
Other technical data:
- meter’s power supply: battery package SONEL/Ni-MH 4,8 V
- battery charging time: approx. 2,5 hours
- number of measurements with the current of 10 A: 300
- auto-off time: 120 seconds
- immunity to interference: additional error ≤1% for voltage 50 Hz ≤100 mV RMS
- maximum leads resistance for the 10 A current: 0,1 Ω
- maximum inductance of the tested object: 40H
- accuracy of the test current: ±10%
- resistance measurement time:
- with the selected resistive object type with the bidirectional current: 3 seconds
- with the selected inductive object type, dependant on the resistance
and inductance of the object: a few minutes (max. 10)
- dimensions: 295 x 222 x 95 mm
- weight: approx. 1,7 kg
Rated operational conditions:
- operation temperature: 0...+40°C
- storage temperature: -20...+60°C
MMR-620 microohmmeter conforms the following directives
or standards according to CE requirements.
Directive:
Low Voltage Directive (LVD) 73/23/EEC, 93/68/EEC.
Standards:
EN 61010 - 1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements .
EN 61010 - 031:2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test.
Directive:
Electromagnetic compatibility (EMC) 89/336/EEC, 92/31/EEC, 93/68/EEC.
Standards:
EN 61326:1997+A1:1998+A2:2001 Electrical equipment for measurement, control and laboratory use - EMC requirements.
Resistance measurement
MMR-630 Current Accuracy
Range Resolution
0...999,9μΩ 0,1μΩ 10 A ±(0,25% m.v. + 2 digits)
1,0000...1,9999 mΩ 0,0001 mΩ
2,000...19,999 mΩ 0,001 mΩ
20,00...199,99 mΩ 0,01 mΩ 1 A
200,0...999,9 mΩ 0,1 mΩ 0,1 A
1,0000...1,9999 Ω 0,0001 Ω
2,000...19,999 Ω 0,001 Ω 10 mA
20,00...199,99 Ω 0,01 Ω 0,1 mA
200,0...1999,9 Ω 0,1 Ω 0,1 mA
- input impedance of the voltmeter: ≥200 kΩ
„m.v.” - measured value.