Chi tiết sản phẩm

Chi tiết
Brochure
BERTWave™ MP2100B
MX210001A Jitter Analysis Software/MX210002A Transmission Analysis Software
Features
Built-in 4ch BERT and sampling oscilloscope
Simultaneous 4ch Bit Error Rate (BER) measurements
High-quality waveform PPG (1 ps rms Jitter)
High-input sensitivity (10 mVp-p minimum input sensitivity)
High-speed Eye Mask test and Eye pattern analysis at 150 ksample/s max.
Supports differential signal BER measurement, Eye Mask test and Eye pattern analysis
Up to six built-in Bessel filters for full-featured application support
Compact (18 cm deep) test set for optical module evaluation
Simultaneous measurement of BER, Jitter, Eye pattern and Eye Mask
Supports WDP measurements
Calculates optimum values for sampling simultaneously with equalizer and emphasis values to display Eye Pattern
Simultaneous Eye Pattern, Eye Mask and Jitter measurements of simulated waveform
Description
The BERTWave MP2100B is an all-in-one test set with built-in BERT and sampling oscilloscope supporting evaluation of optical modules, including BER measurements, Eye Mask tests, Eye pattern analyses, etc.
A BERT and sampling oscilloscope are required measuring instruments for evaluating optical modules used by optical communications systems. Previous evaluations of optical modules, such as QSFP+ and SFP+ modules, required provision of a separate BERT and sampling oscilloscope. However, the BERTWave MP2100B incorporates a BERT supporting up to 4 channels as well as a sampling oscilloscope in a single, compact, 18 cm deep cabinet, slashing equipment investment costs and saving bench-top space. In addition, the BERTWave MP2100B reduces measurement times by eliminating the need to change cable connections at simultaneous BER measurements, Eye Mask tests, and Eye pattern analyses. Additionally, adding the SFP+ plug-in port supports optical BER measurements.

The BERTWave MP2100B BERT function supports BER measurements at speeds ranging from 125 Mbit/s to 12.5 Gbit/s; its built-in 4ch BERT option makes it easy to configure test systems for multichannel modules, such as QSFP+ and AOC. Further, in addition to supporting BER measurements for differential signals, it also supports Eye Mask and Eye pattern Measurements.

The BERTWave MP2100B sampling oscilloscope has a bandwidth of 25 GHz (typ.) for electrical interfaces and a bandwidth of 9 GHz (typ.) for optical interfaces. In addition, up to six optional Bessel filters can be built-in for measuring optical signals using the scope. Using these filters, MP2100B supports extinction ratio measurements, Eye Mask tests and Eye pattern analyses for various applications. Further, the scope has a Fast Sampling Mode to secure the fastest high-speed measurements; sampling speeds of up to 150 ksample/s are supported by Fast Sampling Mode, which is 1.5 times faster than legacy models and supports time-saving high-speed Eye Mask tests and Eye pattern analyses.

Using the Jitter Analysis MX210001A software facilitates easy all-in-one simultaneous Jitter analysis, Eye pattern and Eye Mask measurements and the 150 ksample/s sampling speed makes even more efficient use of measurement time. Combined use with MATLAB® supports waveform dispersion measurements for specific signals, such as WDP, TWDP, and dWDP waveforms.

Last, the Transmission Analysis MX210002A software adds functions for analyzing device transmission (S21 gain and phase), plus a De-Embedded waveform simulation function executed by linear equalizer, filter, and Emphasis calculations. Simultaneous waveform sampling and simulation as well as simultaneous Eye pattern and Eye Mask measurements are supported. Combined use with the MX210001A software also enables simultaneous Jitter measurements of simulated waveforms.

MATLAB® is a registered trademark of The MathWorks Inc.

BERT
Operation Bit Rate
With MP2100B-092
Without MP2100B-092
PPG, ED Common:
Variable bit-rate range (1 kbit/s step)
125 Mbit/s to 12.5 Gbit/s
PPG, ED Common:
Variable bit-rate range (1 kbit/s step)
8.5 Gbit/s to 11.32 Gbit/s
1/N bit-rate operation range
N=2：
4.25 Gbit/s to 5.66 Gbit/s
N=4：
2.125 Gbit/s to 2.83 Gbit/s
N=8：
1.0625 Gbit/s to 1.415 Gbit/s
N=16：
531.25 Mbit/s to 707.5 Mbit/s
N=32：
265.625 Mbit/s to 353.75 Mbit/s
N=64：
132.813 Mbit/s to 176.875 Mbit/s
Test Pattern
PRBS: 27-1, 29-1, 215-1, 223-1, 231-1 (Invert ON/OFF)
USER Data: 1.3 Mbits programmable (sample pattern file such as CJPA, etc.)
Electrical Data Output
Data, Xdata
Amplitude
0.1 Vp-p to 0.8 Vp-p
Electrical Data Input
Data, Xdata
O/E Input
Optical data
Wavelength Range
750 nm to 1650 nm
Sampling Oscilloscope
Bandwidth (-3 dB)
Electrical: DC to 20 GHz minimum, DC to 25 GHz typ.
Optical: DC to 9 GHz (typ., at electrical -3 dB cutoff without filter)
Display
Eye pattern, Pulse pattern, Coherent Eye
Measurement Function
Statistical (NRZ), Histogram, Mask compliance
Sampling Speed
Normal: 100 ksample/s (typ.)
Fast Sampling Mode: 150 ksample/s (max.)
O/E Input (Option 023)
Optical data
Wavelength Range
750 nm to 1650 nm
Clock Recovery (Option 055)
0.1 GHz to 2.7 GHz, 8.5 GHz to 12.5 GHz
Jitter Analysis Software MX210001A
Operating Conditions
Operates only when installed in MP2100B with correct license information
The installer runs with V3.00.00 or later
Other use conditions comply with MP2100B series
The WDP runs under MATLAB R2010b SP1
Measurement Algorithm
Histogram mode, Pattern search mode
Histogram Mode
Measurement Items
TJ (1.0E-12), TJ (user defined), RJ (d-d), DJ (d-d), DDPWS, J2 Jitter analysis, J9 Jitter analysis, Eye opening
Pattern Search Mode
Measurement Items
TJ (1.0E-12), TJ (user defined), RJ (d-d), RJ (rms), DJ (d-d), PJ (p-p), DDJ (p-p), DCD,
ISI (p-p), Eye opening, J2 Jitter analysis, J9 Jitter analysis, DDPWS, PJ Frequency
WDP Measurement
Requires installation of MATLAB® 2010b by MathWorks
Measurement Items
WDP, dWDP, TWDP, dTWDP, WDPc, dWDPc, TWDPc, dTWDPc
Transmission Analysis Software MX210002A
Operating Conditions
Operates only when installed in MP2100B with correct license information
The installer runs with V3.00.00 or later
Other use conditions comply with MP2100B series
Measurement Mode
Transmission analysis, Waveform estimation
Transmission Analysis
Measurement Items
Gain graph, Phase graph, Group delay graph
(Phase graph and Group delay graph switching display)
Waveform Estimation
Equalizer Setting
Selects reflector, non-reflector at calculation
Emphasis Format
2Post/1Pre, 3Post, 1Post/1Pre, 2Post, 1Post
Device Character
Reads S2P file
Jitter Analysis
Displays estimated waveform calculation results at MX210001A
(when MX210001A installed in MP2100A)
Applications
40 Gbit/s QSFP+ (4 x 10 Gbit/s) Measurement
Active Optical Cable (AOC) Measurement
PON Device BOB (BOSA On Board) Evaluation
Direct Attach Cable (DAC) Measurement
<a href="htt