Chi tiết sản phẩm

50MHz Vert. Band width
Sweep Time 23 Steps
Dual & Trace, ALT Trigger
Hold-off, X-Y operation
High Vert, Sensitivity : 1mv/DIV
High Sweep Resolution : 10ns/DIV
Chi tiết
CRT
Type : Rectangular with integral graticule.
Display Area : 8 x 10 div ( 1 div = 1 cm)
Accelerating Voltage : 2.1 kV.
Phosphor : P31.
VERTICAL AMPLIFIERS ( CH 1 and CH 2 )
Sensitivity : 5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 1 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator.
Vernier control provides fully adjustable
attenuation between steps.
Accuracy : ± 3 % ( X1 mode ). ± 5 % ( X5 mode ).
Input Resistance: 1 MΩ ± 2 %
Input Capacitance: 25 pF ± 10 pF.
Frequency Response: 5 mV to 5 V / div ( CAL ):DC
to 50 MHz (-3 dB). 1 mV / div :
DC to 15 MHz (-3 dB).
Rise Time: Approximately 7.0 ns.
Operaing Modes: CH1: CH 1, single trace. CH2: CH 2,
single trace. ALT: dual trace, alternating.
CHOP: dual trace, chopped. ADD:
algebraic sum of CH 1 + CH 2.
Polarity Reversal (Invert): CH 2 only.
Maximum Input Voltae: 400 V dc + ac peak.
HORIZONTAL AMPLIFIER ( Input through channel 1 input )
X-Y mode: 1mv/div to 5v/div
Sensitivity: DC~1MHz(-3db)
Accuuacy: Y-Axis: ±3%. X-Axis: ± 6%.
Input Impedance: 1MΩ //25PF
Frequency Response: DC to 1 MHz typical ( -3 dB ).
X-Y Phase Difference: Approximately 3° at 50 kHz.
Maximum Input Voltage: 400V dc+ac pack
SWEEP SYSTEM
Sweep Speed: 0.1 μs/div to 2S/div in 1-2-5 sequence,
23 steps. Vernier control porvides fully
adjustable sweep time between steps.
Accuracy: ±3 %.
Sweep Magnification: 10X, ±10%(2S/DIV - 0.2 μS/DIV).
extend sweep speed up to 10nS/DIV.
Holdoff: Continuously adjustable from NORM to 5 times normal.
TRIGGERING
Trigger Modes: AUTO ( free run ) or NORM.
Trigger Source: CH1, CH2, ALT, EXT, LINE.
Maximum External Trigger Voltage: 300 V dc + ac peak.
Trigger Coupling: AC : 30 Hz to 50 MHz. TV - H (AC) :
Used for triggering from horizontal sync
pulses.TV - V : (DC) Used for triggering
from vertical sync pulses.
Trigger Sensitivity: Internal: 0.5 division ( 1 division with TV
Coupling ). External: 500 mV.
OTHER SPECIFICATIONS
Calibrating Voltage: 1 kHz ( nominal ) Positive Square
Wave, 2.0 V p-p ( ± 3% )
Trace Rotage: Electrical, front panel adjustable.
Power Requirements: 115, 230 VAC ±10%, 50 / 60 Hz, approximately 40 W.
Dimensions: 324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" ).
Weight: Approximately 7.8 kg ( 17.2 1bs ).
Rated Range of Use 10°C-35°C, 10-80% R.H.
Limits of Operation: 0°C-50°C, 10-80% R.H
Storage Environment -30°C-70°C, 10-90% R.H.
C E STANDARD: E.M.C. Regulations-1992
( E.C. Directive 89/336/EEC )
EN 50081-1 Emissions. EN 50082-1 Immunity.