Chi tiết sản phẩm

Dung tích buồng: 125 lít
Hệ thống điều khiển: Lập trình, điều khiển bằng màn hình cảm ứng
Dải nhiệt độ: -25 đến 100 ℃
Thời gian làm nóng từ 25℃ đến 100℃ (phút): 34
Thời gian làm mát từ 25℃ đến -25℃ (phút): 44
Tải lớn nhất trên mỗi giá (kg): 15
Tổng tải cho phép (kg): 50
Kích thước bên trong (mm): 500×500×500
Kích thước bên ngoài (mm): 1060×702×1340
Trọng lượng: 160 kg
Cổng giao tiếp: RS232
Nguồn điện (230V, 60Hz): 1ph / 15.5A
Chi tiết
Datasheet
Performance
Suitable for specific use such as heat treatment and drying process.
Microprocessor PID control / Temperature calibration / Automatic tuning.
Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
Two-point door latch also enhances tightness to door closure.
Energy efficiency is achieved thanks to optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 51℃.
(DIN EN 563)
Reliable design and production of door is guaranteed.
- Evaluates the results after opening the door by 90 degrees and applying 50kg load to the point of 30cm from hinges.
Safety
User selectable operation mode after power interruption
- ether Automatic run or Manual run.
Over-temperature protection.
Over-current and current leakage protection.
(ELCB, earth leakage circuit breaker)
Independent safety fuse.
- Important parts such as controller and heaters are highly secured from short circuit. Especially each heater has an individual fuse to completely break a short circuit.
Reversed-phase protection.
- Electrical connection error indicator helps user to rapidly fix the connection.
Over-current protection of motor.
- Automatic shut-off in situations where there is over-current to the motor.
Open door warning.
- Heater and fan stop when the door is the open state.
Electric wiring panel access warning.
- Automatic stop if the cover of electric wiring panel is opened.
Built in door lock with a key.
Convenience
Corrosion resistance stainless steel inner chamber.
Space efficient and easy loading chamber design.
- Included two shelves for loading of large amounts of samples.
- Heavy load shelving, rated for 40kg are also available.
(optional)
User friendly LCD controller.
- Colorful interactive touch type LCD controller.
- Set point temperature and present temperature are clearly shown together on display.
- Sufficient programmable control support.
- Operating progress can be shown in graph mode for better data understanding.
- Automatic start/stop can be programmed for unattended operations.
- Display indicates abnormal temperature changes or power failures.
- Three different language support.
(English / Chinese / Korean)

- Temperature and other operating parameters can be recorded using a six channel digital recorder.
(optional)
Computer interface.
- RS-485 communication port
(optional)
enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
- Program patterns are simple to set with the use of our software.
- Easy to check status of real-time operations. Graph data supports easy understanding.
- Storage and documentation of programs.
- Data with saving capabilities in excel and text format.
- Storage of program information, backup of value settings, recovery, and temperature values.
- RS-232 communication port as standard offer
2021-2022 Lab Companion